T&L Publications

hi
thanks guys , i found a place that carries 28c64's and they will be fine for my project , i was hoping some parts place still carried the 28f64's , thanks again , dana

hi
i am building a SBC and want to use an 8K x 8 flash ram , does anyone know where i can find a source for these chips thanks , dana

hi Rudy i don't usually give up on a project like this , but after banging my head against it for a few weeks , i realized we must be missing a few pieces of the puzzle :???: , but after seeing this post today , i am thinking although the nuts & volts article doesn't supply enough info on gettin...

hi sorry i didn't see your posts sooner , i have had basically the same problems , i can get the hex file listed to run the chip fine but although i can get the source file to compile , the produced hex file comes out a different size and then doesn't run , i have been hoping A.Enzmann would see thi...

hi i've been useing ExpressPCB and really like it , the boards are great and the turn around is good , the other thing they let you do , that some of the other companies wont is , you can make multiple copies of a small board so say your three mini boards will cut up into 12 smaller boards :grin: th...

hi setec yes i was busy trying that and getting nowhere :sad: , and posted on another forum and come to find out i have the lastest (official) release of sdcc >02.5.0< and it doesn't support the 18f2455 , for that you need whats called the daily snapshot :???: the latest snapshot is version 02.5.6 j...

hi Michael

sorry , i didn't mean to double post , still just banging my head on this and trying to get a question up where someone will see it , dana

hi i have been working on the project from the n&v article USB DEVICE CONTROL and have the hex file loaded and working but i downloaded SDCC and GPUTILS and have them installed on an XP system and cannot get SDCC to compile the main.c program from the article , any help would be great :grin: , d...

hi i was able to get the supplied hex file working without too much trouble , just me chugging up the learning curve :???: :smile: , but i realized i want to compile the main.c file and get it so i can edit it to work , from the article he seems to be useing SDCC and GPUTILS and i went to sourceforg...

hi
went back to sourceforge and found there is an installer for win32 , thanks , dana

hi i am trying to work with a "C" program and get it compiled and converted to a hex file so i can load it into a pic chip , i downloaded SDCC and GPUTILS and have SDCC working fine but getting GPUTILS to load on a XP system is beyond me :???: , it is setup for a linux system and i underst...

hi thanks , i just checked it out and see a thread for USBCNC , most of the small CNC machines run off the printer port , and USB seems to be the new trend , USB has been beyond most people at the hobbiest level ( me :grin: ) and with the new pic's the door is starting to open , the USBCNC is design...

hi i have been interfacing with the parallel port for years and now that USB is the standard port i want to be able to use it instead i have a plasma CNC cutter i built and a 3D room scanner and various micro controller projects and have used the EPP port on my system , so for instance with my plasm...

hi i just got a olimex ( pic-mcp-usb ) programmer from sparkfun for $87.00 http://www.sparkfun.com/commerce/product_info.php?products_id=4 i thought it was a good setup as it doesn't need an external power supply and it comes with the ZIF socket the usb it has is a built in usb-serial , don't know a...

hi
i got started with a copy of Forrest Mims Engineer's Notebook , $3.95 at Radio Shack in the 80's , dana