Search found 5 matches

by randyr
Mon May 13, 2013 7:12 pm
Forum: SERVO Magazine Discussions
Topic: Kronos Flyer Series
Replies: 170
Views: 52067

Re: Kronos Flyer Series

Kronos Flyer tips. Label everything, it helps when you have to replace parts and keeps things in perspective. 1. the 4 motor mounts eg. M1 CCW, M2 CW, M3 CCW, M4 CW 2. the frame orientation, eg Front/Back 3. the ESC's 1,2,3,4 4. the motor phase connections (on either side) after prop rotation is set...
by randyr
Fri Mar 08, 2013 1:53 pm
Forum: SERVO Magazine Discussions
Topic: Kronos Flyer Series
Replies: 170
Views: 52067

Re: Kronos Flyer Series

Mike, I still need help setting up the Turnigy TX. Which type Heli or Acro; Stick set mode; (then it asks THRO REVERSE?)?.
I am using FM-PPM, Heli type 4, PPM Modulation, Stick set Mode 2, What am I doing wrong?
I also can't get into the Pitch curve ID1 or 2 screens, help?
by randyr
Thu Mar 07, 2013 7:00 am
Forum: SERVO Magazine Discussions
Topic: Kronos Flyer Series
Replies: 170
Views: 52067

Re: Kronos Flyer Series

Michael, as a real newby to RC, I am having difficulty with the Turnigy 9X/Naza/Kronos Quad set up. Do I have to bind the TX to RX first before Naza set up, how does the RX (9X8CV2) get its power? Is it through the servo cable? I have found a Utube guide on how the bind the TX/RX using a 6 voly batt...
by randyr
Fri Feb 15, 2013 8:01 pm
Forum: SERVO Magazine Discussions
Topic: Kronos Flyer Series
Replies: 170
Views: 52067

Re: Kronos Flyer Series

In reviewing the Jan 2013 issue, Step 9, you mentioned NTM motors and Multistar ESC's in the same line. Does that imply that the NTM's must be used with Multistar or can I use the 25 amp Plush ESC's that I have on order?Soldering on the proper connectors is not a problem for me. But will there be an...
by randyr
Wed Feb 13, 2013 6:54 pm
Forum: SERVO Magazine Discussions
Topic: Kronos Flyer Series
Replies: 170
Views: 52067

Re: Kronos Flyer Series

Hi, I just started ordering the parts to build the Kronos Flyer and would like to know if increasing the motor center span to 18 or 19 or 20 inches would adversley affect the performance of the quad? Your thoughts on this would be appreciated. I will be using the Naza controller with GPS and the NTM...