T&L Publications

Mike,<p>In dreamweaver typing 0 in for all of the margins, is the smae thing as putting the following in the body tag
leftmargin="0" topmargin="0" marginwidth="0" marginheight="0"<p>Dreamweaver just does it for you.<p>Eddie

You need to put the following in the body tag and have the width of the table set to 100% <p>leftmargin="0" topmargin="0" marginwidth="0" marginheight="0"<p>Eddie

I have just recently started fooling around with electronics.<p>I do not have many components lying around and the prices of full assortment can be quite high.<p>I have many hobbies so it is hard to justify the cost of all of them.<p>In an attempt to acquire some stock I have been scavenging of old ...

Will I think you mean web address?<p>I Googled it and found this.<p>http://www.foundrysearch.com/<p>Hope this helps.<p>Eddie

Myp71,<p>I use one probe and manually insert the probe about a 1/4 inch into the tire.<p>Eddie

Al,<p>Thanks, yes this is how I set camber and tire pressure.<p>After a run we measure 3 point on each tire each side and the center.<p>If the center is hotter than both outside edges that pressure is to high.<p>If outside edge is hottest than to much negative camber, etc...<p>Though I have moved on...

Mike,<p>Try: SELECT `name_of_title_feild`, `name_of_memo_feild` FROM `name_of_table` WHERE `name_of_title_feild` LIKE '%search_term%'<p>This is a MySQL query but I believe VB will be the same, SQL is 90% standardized.<p>The "%" before and after the search term are wild cards and will match...

Thank you all for your help.<p>I will most likely use MrAl formula, as it best fits my needs.<p>I did not want to use the table, as the values are to spread out.<p>Also, a thanks goes to Nuts and Volts for their great magazine this form.<p>I am just starting to explore the wonderful world of electro...

Hi I am new to this board and just learning about PIC chips.<p>I am building a tire temp gauge for my racecar.<p>I am currently using thermister that I got from Radio Shack part number 271-110.<p>It has a table on the back that has the ohms to temp values.<p>I now just have it connected to an ohms m...