T&L Publications

Yep, that was it. I removed the solder blob off 0.2 V And put one on 20 V Now the voltage is reading correctly with the decimal correct as well. The instructions say nothing about this jump. You made me think of it because it has a resistor on the board next to these jumpers. You mention putting a r...

It does not matter which way I jump it P2 or P3 it only moves the decimal, or makes it appear. Funny how the instruction say' 0.2 V jump p3 20 v jump p2 200 v jump p3 500 v jump _ I think it should read 0.2 v jump p1. There is also a place on the board that had a place to jump 0.2v 20v 200v 500v It ...

I see this thread is pretty old but here goes. I too have the PM-1029A version of this meter. It looks pretty straight forward. I tried testing the meter with a 12 volt battery and used a 9 volt battery as my power supply. The meter shows the voltage for a half second and then drops to 1 I tested se...