Servo controller web interface
Posted: Thu Oct 04, 2007 11:26 am
Hello,
I recently built a web interface for one of my servo controllers. It is open source. It is set to work on port 81 by default and the project was created using C++ .NET 2005.
I set it up to work with my own servo controller so if you want to use another type you must have an API or add some serial code to the software but the transmission code should be fine.
Find it here:
Source: www.endurance-rc.com/software.html#webinterface
I recently built a web interface for one of my servo controllers. It is open source. It is set to work on port 81 by default and the project was created using C++ .NET 2005.
I set it up to work with my own servo controller so if you want to use another type you must have an API or add some serial code to the software but the transmission code should be fine.
Find it here:
Source: www.endurance-rc.com/software.html#webinterface