Anybody have a reference for repairing a 90v DC motor drive PCB for the x axis on this mill? We bought the mill used, and the board is toasted with multiple burned resistors, traces- appears unrepairable but....? Bridgeport of course wants big $$ to replace the whole assembly.
Thanks!
John
Bridgeport Mill Motor Driver
Bridgeport Mill Motor Driver
WA2RBA
Re: Bridgeport Mill Motor Driver
have you checked ebay. a quick search gives some possible hits.
-
- Posts: 233
- Joined: Wed Jul 13, 2005 1:01 am
- Contact:
Re: Bridgeport Mill Motor Driver
--Edited by Positronicle--
Re: Bridgeport Mill Motor Driver
Try this website www.machinemanuals.net
I would E-mail them and ask them if they would
have schematics
I would E-mail them and ask them if they would
have schematics
Re: Bridgeport Mill Motor Driver
If it is the old kind that mounts on the end of the drive screw and has a reversing lever on top I can mayby help you. The print for it would be the last page of the Bridgeport manual. If i can find a copy i'll send it to you.<p>[ July 18, 2005: Message edited by: josmith ]</p>
Re: Bridgeport Mill Motor Driver
josmith- yes it is an oldie, and I'd very much like a schematic! By all means, if you can locate it, I'll owe you one!!
WA2RBA
Re: Bridgeport Mill Motor Driver
Try Electro Mechanical Integrators athttp://www.emi-inc.net/. They specialize in Bridgeport. You could also consider upgrading your control electronics. EMI is also a dealer of my company's (Centroid) CNC controls for Bridgeport mills.
Who is online
Users browsing this forum: Google [Bot] and 2 guests