Element ELEFW408 TV.......
Posted: Thu Sep 21, 2017 1:19 pm
I currently have this set sitting on the bench.
A friend dug this out of the garbage, and handed it to me.
Asking if it was worth fixing.
The set was built in Nov 2014.
The screen isn't cracked.
Wouldn't power on, but the standby light was on.
After I got the back off, I could tell right away I wasn't the first person to look at this set.
The ribbon cables from the T-con board were kinked, from someone tugging on them.
There are a few components on the Main board/Power Supply that look cooked.
Plus, the Back Light LED's seem to be burn out.
Even though most of the parts are used in several different brands of TV's.
I'm finding that each board is specifically design to fit with only a certain production run of the set!
Which means I can't just switch out the damage board for one out of another make of TV!
Okay,
The first board I'm trying to find is:
Main board/Power Supply: 34012801<---The Important Number
More numbers:
N14090108-0A00940
V400HJ6-PE1 67% 75W03
This is what it looks like:
Signed: Janitor Tzap
UPDATE:
After just adding up just the cost of parts, and shipping.
It came up to about $200.
{And that doesn't even include my labor!}
I told my friend that a 32" LED sets cost less than that.
So, he said too go ahead and junk it.
I'm tempted to see if PTS would take it just for parts.
Hmmm.........
A friend dug this out of the garbage, and handed it to me.
Asking if it was worth fixing.
The set was built in Nov 2014.
The screen isn't cracked.
Wouldn't power on, but the standby light was on.
After I got the back off, I could tell right away I wasn't the first person to look at this set.
The ribbon cables from the T-con board were kinked, from someone tugging on them.
There are a few components on the Main board/Power Supply that look cooked.
Plus, the Back Light LED's seem to be burn out.
Even though most of the parts are used in several different brands of TV's.
I'm finding that each board is specifically design to fit with only a certain production run of the set!
Which means I can't just switch out the damage board for one out of another make of TV!
Okay,
The first board I'm trying to find is:
Main board/Power Supply: 34012801<---The Important Number
More numbers:
N14090108-0A00940
V400HJ6-PE1 67% 75W03
This is what it looks like:
Signed: Janitor Tzap
UPDATE:
After just adding up just the cost of parts, and shipping.
It came up to about $200.
{And that doesn't even include my labor!}
I told my friend that a 32" LED sets cost less than that.
So, he said too go ahead and junk it.
I'm tempted to see if PTS would take it just for parts.
Hmmm.........