idontknow-
Running 18 volts on a 12 volt motor may soon become a fuel pump/heater.
How about a fuel cooler to increase fuel density?
11.5Vdc / 12Vdc to 12.5Vdc/13Vdc
Re: 11.5Vdc / 12Vdc to 12.5Vdc/13Vdc
If you want to know if increasing the voltage to the fuel pump will help. hook a shop charger to it while it's running on the dyno. My thoughts on this problem lead me to the tank pump at best a totally insane design- toss it and use a high capacity inline pump. Do your injectors have orifices designed to provide the fuel flow to generate 700+ hp? 1000 hp is about 4.7 pounds of gas a minute- about two liters thats what you need to flow out of the injector pump at the pressure required for the injectors to operate.
good luck
tj
good luck
tj
Who is online
Users browsing this forum: Ahrefs [Bot] and 2 guests