Wanted in trade...

[Externet]

Hi.
Am looking for a portable DVD player with a 7" to 8" screen, not larger, does not matter if the DVD works or not, or a headrest back LCD monitor or a portable LCD TV would be fine too, MUST have a working 'video IN' NTSC jack.

Offering a Kenwood 7800 2m transceiver
(http://www.rigpix.com/kenwood/tr7800.htm) or
Motorola Radius M10 2m transceiver
(http://www.repeater-builder.com/maxtrac ... index.html) or
Nakamichi T100 audio analyzer (http://www.analogstereo.com/pdf/sm/nakamichi_t100.zip) or
many other 'toys' I am not using lately, tell your wishes and perhaps I have it.

Wish number 2: Looking for a 'lipstick' or 'bullet' type surveillance camera,

Miguel----> externet at inorbit dot com

[FOB]

I'm interested in the Kenwood 7800 .... do you have a price in mind? I don't have what you want to trade.[/list]

[Externet]

Hi FOB
Let's continue that part of the conversation via my email in the post above.
Miguel

[Externet]

Hi all.
Reviving this post, with some other toys available for trade:

Tektronix 2213 oscilloscope
Tektronix 2235 Oscilloscope
Tektronix 434 oscilloscope
Hitachi V-212 oscilloscope used only a couple of hours
TEAC reel-to-reel tape recorder

and the previously offered
Motorola Radius M10 2m transceiver
(http://www.repeater-builder.com/maxtrac ... index.html)
Nakamichi T100 audio analyzer
(http://www.analogstereo.com/pdf/sm/nakamichi_t100.zip)

Of course all in good working order.

----->Looking for :
-a TV with digital tuner, not larger than 17" ;
-a not-kid-type metal detector (never had one )
-a golf cart DC motor, of about 4HP

Or interesting goodies you may have for trade.
Miguel

[jwax]

Externet- Keep an eye on the curb or craigs list for a treadmill kind of exerciser. They have a dandy DC motor from several HP up to 8 HP!
Found one curbside, replaced the MOSFET, and it had a motor like what you seek.
Plus, some folks find they are a lot of work to run, so toss them out!

[Externet]

Thanks, John
Your motor, what voltage is it? Is it over 50VDC ?
... Up to 8HP, sounds too much for the wiring I expected on a treadmill ; it is like 6Kw, running DC would be a monstruous transformer/supply/rectifier if not a switcher
At half that power would still need supply from 230V mains.
Will keep open eyes for one,
Miguel