It is currently Wed Dec 13, 2017 8:29 pm

All times are UTC - 8 hours




 Page 1 of 1 [ 8 posts ] 
Author Message
 Post subject: Wanted : electret condenser microphone capsules...
PostPosted: Fri Nov 10, 2017 1:48 pm 
User avatar

Joined: Fri Feb 01, 2002 1:01 am
Posts: 1746
Location: Mideast USA
Hi all. Please check behind your spider webs for any vented electrets. Typical 9.5mm size or low profile; with or without pins/leads.

They look like :

Attachment:
Vented.jpg
Vented.jpg [ 138.9 KiB | Viewed 248 times ]

Attachment:
vented2.jpg
vented2.jpg [ 12.33 KiB | Viewed 248 times ]

Attachment:
vented3.png
vented3.png [ 64.69 KiB | Viewed 248 times ]


Miguel



_________________
- Abolish the deciBel ! -
Offline
 Profile Send private message  
 
 Post subject: Re: Wanted : electret condenser microphone capsules...
PostPosted: Sat Nov 18, 2017 12:30 pm 
User avatar

Joined: Sat Aug 12, 2006 4:17 pm
Posts: 1268
Electronics Goldmine has these:
Image
http://www.goldmine-elec-products.com/p ... ber=G20765


Signed Janitor Tzap


Offline
 Profile Send private message  
 
 Post subject: Re: Wanted : electret condenser microphone capsules...
PostPosted: Sun Nov 19, 2017 5:14 pm 
User avatar

Joined: Fri Feb 01, 2002 1:01 am
Posts: 1746
Location: Mideast USA
Thanks, Tzap.

The venting is at the connection side. Yours show the perforations at the sound side.

Ordered some but coming from a chinese vendor is a roulette; if they ship exactly what they show pictured or whatever they want.
I do not think they know what they are selling. Should be here in a week and then will have a good or bad surprise with a complain from me.
But for $1.60 a dozen, its worth the gambling... Will see.



_________________
- Abolish the deciBel ! -
Offline
 Profile Send private message  
 
 Post subject: Re: Wanted : electret condenser microphone capsules...
PostPosted: Sun Nov 19, 2017 6:31 pm 
User avatar

Joined: Sat Aug 12, 2006 4:17 pm
Posts: 1268
Okay,

But I think you've got a longer wait, since they are being shipped from China.
{I was thinking it was going to be at least a month before you'd get them. If you went "FREE SHIPPING".} :razz:

If you just need one, go dumpster diving for a cheap crappy {wired} phone.
Image
Or
An old Cordless Phone.
Image
Just crack it open and grab the condenser mic out of it.


Signed: Janitor Tzap


Offline
 Profile Send private message  
 
 Post subject: Re: Wanted : electret condenser microphone capsules...
PostPosted: Mon Nov 20, 2017 7:40 am 
User avatar

Joined: Fri Feb 01, 2002 1:01 am
Posts: 1746
Location: Mideast USA
:x Have about 2 dozen from canibalized gadgets and telephones of all sorts, none is vented :cry:

Drilled low the sides of one carefully with 0.40mm holes and still works, seems I did not break anything inside, but unsure the plastic spacer inside got drilled all the way trough. One more week to see if wasted my wait time. :sad:



_________________
- Abolish the deciBel ! -
Offline
 Profile Send private message  
 
 Post subject: Re: Wanted : electret condenser microphone capsules...
PostPosted: Mon Nov 20, 2017 9:19 am 
User avatar

Joined: Sat Aug 12, 2006 4:17 pm
Posts: 1268
Are you trying to make a "Noise Canceling" circuit?
Or are you wanting to make an Omnidirectional Microphone?

Because the images of capsules you have posted here, are designed just for that type of application.
The Link I put in to Goldmine Electronics of the Panasonic WM-54BT, is a Omnidirectional Microphone.


Signed: Janitor Tzap


Offline
 Profile Send private message  
 
 Post subject: Re: Wanted : electret condenser microphone capsules...
PostPosted: Mon Nov 20, 2017 11:34 am 
User avatar

Joined: Fri Feb 01, 2002 1:01 am
Posts: 1746
Location: Mideast USA
Do not care about directionality, but the noise cancelling feature does not bother to have.
Building scuba intercoms and pressure at depth would burst the electret film if not vented...



_________________
- Abolish the deciBel ! -
Offline
 Profile Send private message  
 
 Post subject: Re: Wanted : electret condenser microphone capsules...
PostPosted: Wed Dec 13, 2017 3:39 pm 
User avatar

Joined: Fri Feb 01, 2002 1:01 am
Posts: 1746
Location: Mideast USA
Electrets arrived from China last week. As expected, not vented, another idiot vendor and the typical ignorant advertising.
Am drilling the ones I have for the project. Done. Erase the blackboard...



_________________
- Abolish the deciBel ! -
Offline
 Profile Send private message  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 8 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron