FRS radios use for data transmission

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
Knine
Posts: 1
Joined: Wed Jan 16, 2002 1:01 am
Location: bolingbrook il
Contact:

FRS radios use for data transmission

Post by Knine »

I am thinking of using a pair of FRS radio's to transmit data/comands to/from each other. Any suggestions on what would be the best method (DTMF,etc.)? I would like to send unique address followed by some type of control/command data.
Thanks.
unknown_entity
Posts: 98
Joined: Thu Dec 06, 2001 1:01 am
Location: ohio
Contact:

Re: FRS radios use for data transmission

Post by unknown_entity »

i'm pretty sure that there is an FCC rule that designates FRS those for voice communications only.
russlk
Posts: 563
Joined: Thu Dec 06, 2001 1:01 am
Location: New Hampshire
Contact:

Re: FRS radios use for data transmission

Post by russlk »

There are channels in the 27mHz CB band that are designated for radio control & signaling. They are AM only, but you can transmit anything as long as you stay in the band. These channels are un-numbered and in between the lower 13 channels.
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 37 guests