Q and A Column by Russell Kincaid

This is the place for any magazine-related discussions that don't fit in any of the column discussion boards below.
Post Reply
User avatar
jollyrgr
Posts: 1289
Joined: Thu Jan 03, 2002 1:01 am
Location: Northern Illinois
Contact:

Q and A Column by Russell Kincaid

Post by jollyrgr »

Was the Q and A column discontinued and I just missed the announcement?
I think the last time it was published was back in February.
No trees were harmed in the creation of this message. But billions of electrons, photons, and electromagnetic waves were terribly inconvenienced!
User avatar
CeaSaR
Posts: 1949
Joined: Sat Nov 08, 2003 1:01 am
Location: Phoenixville, PA USA
Contact:

Re: Q and A Column by Russell Kincaid

Post by CeaSaR »

Sadly, Russ gave his notice back then and Q & A is on hiatus until another guru will step up to the plate. If you know someone that can troubleshoot, repair, design, code, and write, tell them to send a sample to N & V. Hopefully, this drought will soon end.

CeaSaR
Hey, what do I know?
User avatar
dacflyer
Posts: 4748
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: Q and A Column by Russell Kincaid

Post by dacflyer »

i am surprised that there is not a Q&A here that is linked to the magazine.
or the tech forum for that matter.
User avatar
jollyrgr
Posts: 1289
Joined: Thu Jan 03, 2002 1:01 am
Location: Northern Illinois
Contact:

Re: Q and A Column by Russell Kincaid

Post by jollyrgr »

dacflyer wrote:i am surprised that there is not a Q&A here that is linked to the magazine.
or the tech forum for that matter.
Tech Forum is here:

http://www.nutsvolts.com/tech-forum
No trees were harmed in the creation of this message. But billions of electrons, photons, and electromagnetic waves were terribly inconvenienced!
User avatar
dacflyer
Posts: 4748
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: Q and A Column by Russell Kincaid

Post by dacflyer »

i ment that the Q&A should have a link with in the forum here..
User avatar
CeaSaR
Posts: 1949
Joined: Sat Nov 08, 2003 1:01 am
Location: Phoenixville, PA USA
Contact:

Re: Q and A Column by Russell Kincaid

Post by CeaSaR »

It does. It is listed out on the main/home page underneath / below "Smiley's Workshop".

CeaSaR
Hey, what do I know?
User avatar
dacflyer
Posts: 4748
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: Q and A Column by Russell Kincaid

Post by dacflyer »

my mistake, I been out in the heat all day and hot/tired etc, i ment to say was. the "tech forum."
Tron
Posts: 3
Joined: Wed Oct 02, 2013 12:00 pm
Contact:

Re: Q and A Column by Russell Kincaid

Post by Tron »

The Q and A column by Russ was my favorite part of the magazine. I hope they can find a guy just as intelligent as Russ, especially in designing electrical circuits.

Thanks, BJM
User avatar
CeaSaR
Posts: 1949
Joined: Sat Nov 08, 2003 1:01 am
Location: Phoenixville, PA USA
Contact:

Re: Q and A Column by Russell Kincaid

Post by CeaSaR »

Q&A was one of the first things I read each issue. Sure hope it returns soon.

CeaSaR
Hey, what do I know?
User avatar
dacflyer
Posts: 4748
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: Q and A Column by Russell Kincaid

Post by dacflyer »

Q&A and tech forum were about the main parts of the magazine i'd always read 1st
never was enough of it for me,, i loved it.
User avatar
CeaSaR
Posts: 1949
Joined: Sat Nov 08, 2003 1:01 am
Location: Phoenixville, PA USA
Contact:

Re: Q and A Column by Russell Kincaid

Post by CeaSaR »

Good news! Q&A will be back in either October or November with Tim Brown at the helm. You can read Vern Graner's full reply in Reader Feedback, page 73, of the August 2014 issue.

Thanks Vern, and welcome Tim!

CeaSaR
Hey, what do I know?
User avatar
dacflyer
Posts: 4748
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: Q and A Column by Russell Kincaid

Post by dacflyer »

cool deal... will it be on here as well ?
User avatar
CeaSaR
Posts: 1949
Joined: Sat Nov 08, 2003 1:01 am
Location: Phoenixville, PA USA
Contact:

Re: Q and A Column by Russell Kincaid

Post by CeaSaR »

Didn't say in the write up, but when the board was broken up into all the different categories, the intent was to have a section for each of the individual columns, to which the current author could reply.

CeaSaR
Hey, what do I know?
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot], Google [Bot] and 29 guests