Page 1 of 1

40-pulses Monoshot (200ms/1A) design_help

Posted: Fri Nov 21, 2014 6:58 pm
by vinod
Help me to design a Monoshot with the following specifications

1. 200ms pulse width
2. Magnitude 0.5V steps in 0-20V range (total 40 pulses). That is 0,0.5V, 1V, 1.5V,......,19.5V & 20V.
3. capacity to drive maximum 1A load.

Re: 40-pulses Monoshot (200ms/1A) design_help

Posted: Mon Nov 24, 2014 1:47 pm
by sghioto
vinod,
Whatever happened to that monoshot circuit we worked on back in early 2013 ? Should be able to use the same design with a 24 volt power supply and a beefed up output.

Steve G