Stepper Motor Wiring Diagram

Interested in Robotics? Here's the place to be.
Post Reply
Matt
Posts: 36
Joined: Tue Mar 11, 2003 1:01 am
Location: Bolingbrook,ill. By Chicago
Contact:

Stepper Motor Wiring Diagram

Post by Matt »

Does anyone know the wiring diagram for the Japan Servo Company model KP39HM2 stepper motor? I went to their site but found nothing. It has 2 red, 1 orange, brown, yellow, and black. Any help would be appreciated.
========
--Matt--
========
bwts
Posts: 229
Joined: Tue Jun 11, 2002 1:01 am
Location: britain
Contact:

Re: Stepper Motor Wiring Diagram

Post by bwts »

Hi matt<p>To find the windings on the motor use a continuity test on the wires the continous ones will all be connected to the same winding. I think these ones are 12v R they out of a disk drive? Think Ive got some but havent played with them yet.<p>B)
"Nothing is true, all is permitted" - Hassan i Sabbah
Matt
Posts: 36
Joined: Tue Mar 11, 2003 1:01 am
Location: Bolingbrook,ill. By Chicago
Contact:

Re: Stepper Motor Wiring Diagram

Post by Matt »

It's out of an old 5 1/4 disk drive. I think that it is 12v.
========
--Matt--
========
Droidwerkz
Posts: 31
Joined: Fri Jan 11, 2008 5:58 pm
Location: Rockford Illinois
Contact:

Post by Droidwerkz »

if i remember my terminolgoy, you are using a unipolar stepper (it has 3 field windings, and either 5 or 6 wires) bipolar steppers have 3 or 4 wires (two field windings ) the ones with odd numbers share a common on all coils measure the resistance of the wires , once you have found and sorted it into 3 sets of 2 wires with equal resistance, or into 2 or three sets with a common you have found your two or three field windings , now all you need to figure out is the rotational order and you have it , now it's all about control!
Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests