HDSP-2531 Clock / Date program help anyone ?

This forum is dedicated to the author Joe Pardue as he teaches you about AVR C Programming in his workshop series.

Moderator: joepardue

Post Reply
User avatar
dacflyer
Posts: 4310
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

HDSP-2531 Clock / Date program help anyone ?

Post by dacflyer » Fri Sep 26, 2014 12:04 pm

trying to get more exposure for a project i am working on.. anyone have any suggestions?
what chip to use ? arduino or pick-it types.

http://forum.nutsvolts.com/viewtopic.php?f=45&t=17181

User avatar
joepardue
Posts: 51
Joined: Sun Jul 31, 2011 7:44 am
Contact:

Re: HDSP-2531 Clock / Date program help anyone ?

Post by joepardue » Sun Sep 28, 2014 8:17 am

I'm not familiar with that specific device, however it does seem to have a lot of pins for an Arduino. I Googled 'HDSP-2531 arduino' and got a few hits, but this doesn't seem to be a commonly Arduino'd device.

Joe

User avatar
dacflyer
Posts: 4310
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: HDSP-2531 Clock / Date program help anyone ?

Post by dacflyer » Mon Sep 29, 2014 10:08 am

ya it does have a lot of pins for a smart display...
what do you suggest to work better for it ?

User avatar
joepardue
Posts: 51
Joined: Sun Jul 31, 2011 7:44 am
Contact:

Re: HDSP-2531 Clock / Date program help anyone ?

Post by joepardue » Mon Sep 29, 2014 11:25 am

I wrote a series of articles on an Arduino Handheld Prototyper and part of that was for an I2C MiniTerminal that used a small LCD screen for output. You can find information on this at:
http://blog.smileymicros.com/

You can get started at:
http://blog.smileymicros.com/arduino-ha ... er-part-1/

Joe

User avatar
dacflyer
Posts: 4310
Joined: Fri Feb 08, 2002 1:01 am
Location: USA / North Carolina / Fayetteville
Contact:

Re: HDSP-2531 Clock / Date program help anyone ?

Post by dacflyer » Mon Sep 29, 2014 7:14 pm

ok, thanks.. i'll look into it..

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests