It is currently Tue May 22, 2018 9:39 am

All times are UTC - 8 hours

 Page 1 of 1 [ 1 post ] 
Author Message
 Post subject: Updated Dynamixel Driver
PostPosted: Sun Mar 30, 2014 11:53 am 
User avatar

Joined: Fri Jan 13, 2006 1:01 am
Posts: 4
Location: Burbank, CA
Forgive me, friends, I am guilty of doing a "pretty it up" process after testing code, and -- sadly -- on a few occassions I have introduced a bug doing this. I did with my Dynamixel driver in the sync_write() method.

Attached is an update to the driver and the demo. The demo is the same except that I've added a baud rate table for the bauds supported by Dynamixels. The great thing about using an "soft" UART in the Propeller is that we can run at non-standard rates, hence have virtually zero error is comms (versus standard rates).

I'm presently working on a project and decided to run at 57600 baud -- 1000000 baud resulted in occasional bad packets.

File comment: Updated Dynamixel driver (PASM with Spin interface) and demo program (pan/tilt)
jm_dynamixel_pantilt - Archive [Date 2014.03.30 Time 12.40].zip [19.52 KiB]
Downloaded 116 times

Hollywood, CA
 Profile Send private message  
Display posts from previous:  Sort by  
 Page 1 of 1 [ 1 post ] 

All times are UTC - 8 hours

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: